How To Proceed With Lintel And Wall Tie Replacement Randwick?

How To Proceed With Lintel And Wall Tie Replacement Randwick?

When do you really need to proceed with Lintel & wall tie replacement Eastern Suburbs? The very first reason is when the wall ties have been built into the wall defectively. This means that they will not be able to hold the structure properly, and wall may succumb to the load. Second time you need to go for this is when your original tie structures are made of metal and they are prone to corrosion.

If the cavity wall tie system is properly installed, the loads are shared between the outer and the inner wall structures, thus ensuring stability.

Here we will study all that you need to know about brickwork Randwick when replacing the wall ties.

·         Let’s assume that the walls are constructed using the typical masonry methods. The individual leaf within the walls are at least 90mm thick. In this case, the remedial tying system should be 2.5 wall ties per meter squared

o   The spacing between the wall ties should be 900mm vertically and 450mm horizontally from the center. They should form a domino pattern. At the open reveals, make sure you add another vertical row of wall ties. This should be done at 1 wall tie per 300mm of the wall height

o   Let’s assume that the wall is less than 90mm thick. In this case the wall tie spacing should be more than 2.5tiles per meter squared. This can also increase to 5 wall ties per square meter. In case you are replacing it in a timber like structure, you ought to space it at 4.4. wall ties per meter squared

·         The second thing you need to consider when going with lintel and wall tie replacement Randwick is the type of wall tie you should be using. For this you need to check if you have the cavity wall insulation. Secondly, you will need to avoid the chemically reactive resins, and use walls ties with minimal insulation to minimize effects prevalent due to thermal inefficiencies

o   In order to understand the wall tie present in your wall, you will need to bore an investigative hole. This needs to be done for every elevation, which will help determine if the bricks are solid or not

o   Once you have determined this part, you need to work on the wall tie type. If you are working with solid brick and masonry walls, then you ought to choose the mechanical tie or the helical screw tie

o   If you are tying the perforated bricks or blocks, then you should choose the resin grouted tie

o   In case of cavity insulated walls, the mechanical tie is also an excellent way to replace the existing ones

o   For greater fire performance, you should ideally use the helical screw in wall ties

·         When you are opting for wall tie replacements, ensure you opt for one that has minimal installation process and is less complex. This will cost you less.

Instead of going DIY with brickwork Randwick, make sure you consult a professional.